DIY Guide: How to Clean Your Washing Machine for Optimal Performance and Longevity

Your washing machine is one of the hardest-working appliances in your home, and it is easy to overlook the importance of keeping it clean. Over time, dirt, grime, and detergent buildup can accumulate in your washing machine, leading to bad odors, clogged drains, and even damage to your clothes. Regular cleaning of your washing machine can prevent these problems and help extend the life of your appliance.

Here is a DIY guide on how to clean your washing machine:

Clean the drum
Start by cleaning the drum of your washing machine. Fill the drum with hot water and add a cup of white vinegar or a cup of baking soda. Let the machine run for a few minutes on the highest temperature setting. This will help remove any dirt or grime that has accumulated inside the drum.

Clean the detergent dispenser
The detergent dispenser can also accumulate dirt and grime, which can lead to bad odors. Remove the dispenser and wash it in hot, soapy water. Use a toothbrush to scrub away any stubborn buildup.

Clean the filter
Many washing machines have a filter that needs to be cleaned regularly. Check your user manual to locate the filter and learn how to remove it. Once you have removed the filter, wash it in hot, soapy water and scrub away any dirt or debris.

Clean the rubber seal
The rubber seal around the door of your washing machine can also collect dirt and grime. Use a damp cloth and a mild detergent to clean the seal thoroughly. Be sure to dry the seal completely to prevent mold and mildew growth.

Run a cleaning cycle
Some washing machines have a self-cleaning cycle that you can run to clean the machine thoroughly. If your machine has this feature, follow the instructions in your user manual to run the cycle.

Prevent future buildup
To prevent future buildup in your washing machine, use less detergent than recommended and run the machine on the hottest water temperature setting possible. You can also leave the door open after each use to allow air to circulate and prevent mold and mildew growth.

Regular cleaning of your washing machine is essential for its longevity and to ensure it runs efficiently. By following these simple steps, you can keep your washing machine clean and prevent any damages that may occur due to dirt or grime buildup.

Image by Freepik

Keep Your TV and Remote Control in Top Condition with These 6 Maintenance Tips

Television and remote control are two of the most used electronic devices in our homes. With regular use, they tend to accumulate dirt, grime, and other particles that can damage the devices and affect their performance. It is important to take care of your television and remote control periodically to ensure that they last longer and function efficiently.
Here are some tips on how to take care of your television and remote control to avoid damage.
Clean the screen:
The screen of your television can accumulate dust, fingerprints, and other particles. To clean the screen, use a microfiber cloth or a soft cloth and gently wipe the screen in a circular motion. Avoid using water or any harsh cleaning solutions as they can damage the screen.
Clean the remote:
The remote control can accumulate dirt, grime, and other particles from frequent use. To clean the remote, use a soft cloth or a cotton swab and gently wipe the remote’s surface. You can also use a mild detergent or rubbing alcohol to clean the remote.
Avoid dropping or hitting the remote:
Dropping or hitting the remote can damage the internal components of the remote. Be careful while handling the remote and avoid dropping or hitting it.
Keep the remote dry:
Water or any other liquid can damage the internal components of the remote. Keep the remote away from water or any other liquids.
Protect the TV from power surges:
Power surges can damage the internal components of your television. Use a surge protector to protect your TV from power surges.
Keep the TV clean:
The exterior of your television can accumulate dust, dirt, and other particles. Use a soft cloth and gently wipe the TV’s surface. Avoid using any harsh cleaning solutions or water.
By following these simple tips, you can take care of your television and remote control and avoid any potential damage. Regular cleaning and maintenance can help to extend the life of your devices and ensure that they function efficiently for years to come.

Image by pch.vector on Freepik

6 Easy Steps to Clean Your Refrigerator and Avoid Damages

A refrigerator is one of the most important appliances in our homes, keeping our food fresh and safe to eat. However, with regular use, it can accumulate dirt, grime, and other particles that can damage the fridge and affect its performance. It is important to clean your refrigerator periodically to ensure that it lasts longer and functions efficiently.
Here are some tips on how to clean your refrigerator to avoid damage.
Empty the fridge:
Before you start cleaning your refrigerator, it is important to empty it completely. Remove all the food items and store them in a cooler or a temporary fridge to keep them fresh.
Remove the shelves and drawers:
The shelves and drawers in your refrigerator can accumulate dirt, spills, and other particles. Remove them from the fridge and wash them with warm soapy water. Use a toothbrush or a small brush to scrub any stubborn dirt or grime.
Clean the interior:
Once you have removed the shelves and drawers, it’s time to clean the interior of the fridge. Use a solution of warm water and mild detergent to clean the walls, ceiling, and floor of the fridge. Make sure to wipe down any spills or stains, and use a toothbrush or a small brush to scrub any stubborn dirt or grime.
Clean the door gasket:
The door gasket, which seals the fridge door, can also accumulate dirt and grime. Use a solution of warm water and mild detergent to clean the gasket. Make sure to dry it thoroughly afterward to prevent any mold or mildew growth.
Wipe down the exterior:
The exterior of your fridge can also accumulate dirt, dust, and other particles. Use a damp cloth and mild detergent to wipe down the fridge. Make sure to dry it thoroughly afterward.
Check the condenser coils:
The condenser coils, located at the back of the fridge, can accumulate dust and dirt over time. Use a vacuum or a brush to clean the coils and ensure that they are free from debris.
By following these simple tips, you can keep your refrigerator clean and avoid any potential damage. Regular cleaning and maintenance can help to extend the life of your fridge and ensure that it functions efficiently for years to come.

Image by goonerua on Freepik

DIY Guide: How to Clean Your Air Conditioning Unit for Improved Efficiency and Lifespan

When it comes to keeping your air conditioning unit running smoothly, regular maintenance is key. One of the most important maintenance tasks you can do is cleaning the AC unit. While it’s always best to have a professional HVAC technician clean your unit, if you’re confident in your DIY skills, you can clean your AC at home.

Here are some things to keep in mind while self-cleaning your AC:

Turn off the power: Before you start cleaning your AC, make sure to turn off the power to the unit. This will ensure that you don’t accidentally damage any electrical components while cleaning.

Clean the air filter: The air filter is one of the most important components of your AC unit. It collects dust and other particles from the air, which can reduce the efficiency of your unit. Remove the air filter and clean it with soap and water or replace it with a new one if it’s too dirty or damaged.

Clean the evaporator coil: The evaporator coil is responsible for absorbing heat from the air, so it can become dirty over time. Use a soft brush or a vacuum cleaner with a soft brush attachment to gently clean the evaporator coil. Be careful not to damage the delicate fins on the coil.

Check the condenser coil: The condenser coil is located outside and can become dirty from debris such as leaves and dirt. Use a garden hose to gently spray the condenser coil from the inside out to remove any debris.

Check the fins: The fins on the evaporator and condenser coils are delicate and can become bent or damaged easily. Use a fin comb to straighten any bent fins to ensure that air can flow freely through the coils.

Clean the fan blades: The fan blades can also become dirty and reduce the efficiency of your unit. Use a soft cloth or brush to clean the fan blades and ensure they’re free from any debris.

Check the drainage: Make sure that the drainage system is clear and free from any blockages. Use a vacuum or a pipe cleaner to remove any dirt or debris from the drain line.


In conclusion, self-cleaning your AC unit can help improve its efficiency and prolong its lifespan. However, if you’re unsure about any of the cleaning steps, it’s best to consult with a professional HVAC technician to ensure that your unit is cleaned properly and safely.

Image by vectorjuice on Freepik

Planning To Sell Old AC: 3 Common AC Issues

Air conditioners are essential for living comfortably during the hot summer months, but they can also be a source of frustration when they are not working correctly.

Common AC problems include refrigerant leaks, dirty coils, or electrical malfunctions. These issues range from minor inconveniences to major repair bills, often requiring professional attention. It is important to know the signs of an AC problem so that you can take action quickly and minimize expensive repairs or you should rather replace and sell your old AC  because it will only cost you more expenses.

Common AC Problems:

Refrigerant Leak: If your AC takes longer to cool than usual, you must check for any leakage. Some of the signs of a refrigerant leak can be observed on your outdoor air conditioning unit. If you see frosty ice crystals forming on the evaporator coil during hot weather, it’s time to call for service. Once your system is worn down you will also notice your AC starts getting noisy which also leads to excessive electricity bills this is the time you consider selling your old AC and buying a new one rather than spending a fortune on repairing the old

Dirty Coils: If you do not clean the AC coils on time, you might end up stuffing your AC with dirt. As the evaporator coil is located inside and is not visible on the outside, you do not notice how much dust has been collected on the inside. Thick layers of dirt and dust can lead to internal damage to the AC and also to the consumers breathing the filthy air. To keep your air conditioning system in a good condition it is necessary to clean the evaporator coils.

Electrical Malfunctions: If your AC keeps turning off or if AC is tripping the circuit breaker, you should check the port with other appliances if it is still causing the same issue. Damaged electrical wires, faulty circuit boards, and incorrect voltages can all cause damage to your AC.

Common Electrical Malfunctions in AC are:

  1. AC is turning off unexpectedly or is tripping the circuit breaker
  2. AC has faulty or damaged wiring
  3. AC circuit board failure
  4. Faulty AC capacitor


Regular use of any appliance reduces its performance further leading to repairs and problems. Even after multiple repairs, your system refuses to function smoothly you must consider selling it as there are many websites where you can sell your old appliance for a good price. Replacing old appliances has benefits such as upgraded technology, smooth functioning, adequate electricity bills, and hassle-free living.

How to Sell Old appliance Online? – The Evolving Saga of Re-commerce in India

Have you ever sold your old appliance digitally? Or Are you part of the 90’s trend to discard it in an unorganized fashion? Let’s check out how the fashion of reselling in India has transformed.

First, let us understand what Re-Commerce is.

Re-Commerce means the process of selling old appliances, previously owned, new, or used products through physical or online distribution channels to companies who are willing to repair, reuse, recycle or resell them afterward. Simply put, re-Commerce is the practice of reselling goods. Just think of your thrift stores, clothes boutiques, or pawn shops and you will get the picture. As these goods, need to be in good condition so that they can be presented and sold. Re-Commerce existed from the very beginning but in a very informal way, as people used to sell their old washing machines, sell old TV or sell old AC to local resellers. With the advent of time, there were many online platforms where one could buy or sell old appliances online, after which few customers would always send the products back. The reason for return- most of the products were not delivered in good or promised condition. This unorganized market and the mayhem around selling and buying old appliances forced customers to take easier options to go with the exchange plans with the brands or rely on a trusted and genuine platform.

Back in the ‘90s…

There was no organized sector present, until 2010 the resellers used to pick the product from the market and bring it back to the warehouses of various manufacturers and retailers, as the stocks were sold as stockpiles and not one by one. Later, the transport had to be organized for the stockpile. The buyers of these stockpiles would now search and sell to first-time buyers or people with budget constraints. This was how large appliance re-commerce happened in the ‘90s.

So what happened with the advent of organized retail like large format stores, e-commerce players, brand stores…

When the large format retail stores with modern trade functions like Vijay Sales came into the market, they had huge displays, and these display units needed to be sold. With the increase in the forward sales of these units, the market size of the re-commerce consumer base was also increasing. With the advent of the digital space and the digital revolution of the e-commerce Industry, brands like Flipkart and Amazon started to face an increase in the number of return cases. The return cases arose when the product that was delivered to the customer was damaged or not in an acceptable condition. When the customer opted for the return of the product, the brands started to acknowledge the need for an organized market to sort and resell these products.

In the year, 2008/2009/2010 the re-commerce and reverse logistics industries started to evolve and take an organized structure…

As per the latest stats, there are a lot of youngsters, couples, or families relocating every now and then. So, these people prefer buying a refurbished appliance for a lesser price than spending a hefty amount on the new one. The inclination and interest of people started to increase in the industry. It all started with mobile phones and devices and most people opted for the exchange of older devices. It later expanded to bigger appliances and so on. A lot of resellers and re-commerce players felt that this was the time the Indian economy was growing and there were aspirational buyers everywhere. This marked the pioneering moment when people thought of refurbishing, redesigning, or rebranding and then reselling the old appliances.

This marked the beginning of re-commerce websites that started to bloom. The customers now found an online place where they could directly sell their old appliances. But how is DIGI2L different…

DIGI2L is India’s first digital platform to sell used appliances. While other websites heavily dealt with mobile phones and other smaller gadgets, DIGI2L is specifically into large appliances. Considering the very huge market which is about 1.20cr units per annum. It is the first online platform with an organized market, where customer applies for selling their old appliance. After this, a thorough video quality check of their product is done to give fair pricing. This is followed by a doorstep pickup of the old appliance and instant payment at the time of pickup. DIGI2l makes the entire process of selling old appliances hassle-free, where the customer does not have to search for a buyer or worry about the transport of the old appliance. DIGI2L is customer-ready, price-ready, and payment ready.

Digi2l is India’s first organized re-commerce player in the large appliance category, which is functional across Pan India.

Today there are about 30,000 satisfied customers, who have organically drifted towards this platform looking at the ease and comfort that DIGI2L offers. DIGI2l offers customers the avenue to upgrade while not worrying about reselling their old appliances.

DIGI2L has tied up with giant logistics partners such as Mahindra, Bizlog, and Blue-dart to offer an effortless doorstep pickup experience. The logistic partners are trained to safely pickup the product and deliver it to the end vendors. DIGI2L is also running successful exchange programs with all the lead brands like Samsung, Bosch and Siemens, LG, and platforms like My Gate.


Digi2l’s Future endeavour…

DIGI2L aims to create effortless and convenient platform interphase for customers to sell their old appliances at the ease of their homes. The team is also working on a much-advanced version of the website for a customer to get an instant price quote by just entering their old appliance details. They are constantly working on expanding their social media platform reach and network to stay connected with their customers.

× How can I help you?